NORGREN截止閥產品**
如果您對該產品感興趣的話,可以
產品名稱: NORGREN截止閥產品**
產品型號: 8240600.9101.23050
產品展商: NORGREN
產品文檔: 無相關文檔
簡單介紹
NORGREN截止閥產品**
regulator is suitable for the pipe size needs
(see figure 38) and check with the regulators
flow characteristics. Figure 25 shows flow
NORGREN截止閥產品**
NORGREN截止閥產品**
的詳細介紹
NORGREN截止閥產品**
If the inlet pressure is exposed to
variations then the regulation characteristics
The outgoing air should then be
piped to a receiver of adequate capacity
located in the coolest location available,
Filter/regulators both clean the air to the
application and control the pressure in one
compact unit. For general purpose applications
filter/regulators are usually lower cost
than two separate units.
NORGREN截止閥產品**
ratings of Norgren General Purpose
Regulators . If there is no variation in the
inlet pressure to an application then the
regulation characteristic of the regulator is
unimportant but the flow characteristic willbe.
definitely not within the compressor house
itself. This will permit further cooling of the
air to occur and therefore more condensation.
Decide if the performance requirements
need a standard or precision regulator.
Then decide if the flow capacity of the
NORGREN截止閥產品**
