進口SMC自動補油型油霧器.自動補油油箱
如果您對該產品感興趣的話,可以
產品名稱: 進口SMC自動補油型油霧器.自動補油油箱
產品型號: AL50-1
產品展商: SMC
產品文檔: 無相關文檔
簡單介紹
進口SMC自動補油型油霧器.自動補油油箱
The oil that has been pumped from the tank
passes through felt q where it is filtered,
and is fed into the case through nozzle w.
進口SMC自動補油型油霧器.自動補油油箱
的詳細介紹
進口SMC自動補油型油霧器.自動補油油箱
and the lower limit of the float switch detective range.
The problem of running out of oil is
prevented because the oil is fed
automatically.
This system makes lubrication work
unnecessary, thus significantly
reducing the amount of maintenancelabor.
ISO VG32, Temperature 20°C, Needle fully open. Use
air consumption rate for minimum operating flow.
Note 3) Capacity between levels: in the case of
float switch equipped model, the capacity is
measured in levels between the level gauge upper limit
Turbine oil Class 1 (With no additives), ISO VG32
0.85 0.88 1 1.15 1.85 1.9 12.6 13.2 26.0 26.6
Metal (Steel tubing for machine construction)
Accessory (Option) Part No.
ALF400 ALF400-06 ALF500 ALF600 ALF800 ALF900
Note) A float switch can not be mounted on
“ALT-5” or “ALT-9” afterwards.
–5 to 60°C (No freezing)
Pressure differential 0.3 MPa)
Operating pressure differential range
Difference between tank pressure
Note 1) Tank pressure is the pressure of Auto
Feed Tank and line pressure is the pressure of Auto Feed Lube.
Note 2) Conditions: Inlet pressure 0.5 MPa,
5 drops/min, Turbine oil class 1 (with no additives)
When the volume of oil reaches a certain
level, float e ascends, valve t descends via
lever r, nozzle w closes, and the feeding of
oil stops, thus completing the oil feedingprocess.
